Incorrectly sizing the air conditioner:
Choosing an inadequately sized air conditioning unit is probably the most typical oversight during installation. Short cycling and other energy efficiency problems may result from doing so. When shopping for an air conditioner, it’s important to get one that’s not too small or too large for your home.
A bad drainage system is being installed:
A significant amount of moisture is produced while an air conditioner is running. This excess moisture poses a threat to anything in its vicinity if it is not adequately filtered out. The plasterboard in your home will decay, plumbing will back up, mold will grow, and the air will smell musty.
One of the most typical blunders with air conditioning is a subpar drainage system. Therefore, there is a great deal of residences with water damage. It is highly recommended that you see a professional if you have any issues regarding the installation of your drainage system. To guarantee that everything stays put for the foreseeable future, he or she will install a drainage system for you.
Putting the thermostat in the wrong place:
You should know that thermostats require careful placement. Misaligned furniture and improperly installed air conditioners can lead to uncomfortable temperature swings throughout the building. Your thermostat should be placed somewhere that it won’t get direct sunlight. Light from the sun can confuse an air conditioner, causing it to blow hot or cold air throughout the house.
Your thermostat should also not be placed near draughty openings. Your air conditioner can think it’s colder as well as warmer outside than it actually is if the wind is blowing the wrong way. Again, this would lead to inaccurate temperature readings. Install thermostats in hallways and corridors since they are quiet and out of the way.
Insufficiently sealing the ductwork:
Inadequate ductwork sealing is another common AC installation error. Doing so can significantly reduce the effectiveness of your air conditioner by allowing conditioned air to escape through holes in the ductwork. Actually, your ductwork shouldn’t have any holes or separations in it.
Instead of using tape, which is simply a temporary fix, you should use a permanent sealer to shut up any and all cracks. Get in touch with a local HVAC firm if you need some help with duct sealing. Your ducts will be fully secured for your safety’s sake.
Air conditioner placement error:
The air conditioner is just as susceptible to improper placement as the thermostat. The AC’s efficiency and effectiveness will suffer if it is installed in an inappropriate location. Where then do you put it? Place it where it will receive minimal direct sunlight, like a shady corner. This is why many people place their air conditioner condensers under the eaves of their houses.
Also, make sure there’s enough of space all the way around the container. Make sure there is at least five feet of clearance around the unit from any nearby shrubs, trees or other yard features. Inadequate clearance will force the unit to work harder, which will increase energy consumption and operating costs.
Placement of vents:
The efficiency of your air conditioner is directly related to the placement of the vents. Put them at the wrong spot, and your home won’t get the ventilation it needs. Many people make this error, sadly. What can you do to prevent this? By strategically placing vents so that air may flow freely around the house and avoids being blocked by furniture or other items.
Adding too much refrigerant:
Insufficient clearance around the condenser is the eighth most common mistake people make when installing an air conditioner. If it does not, it will have a hard time taking in air and will have to work considerably harder. This will lead to higher energy costs and unnecessary wear and tear. This means you need to be aware of its surroundings when setting up your AC condenser. You’ll have to reshuffle things around if you ever want to put other things in there.
Insulation the refrigerant line incorrectly:
An air conditioner requires a liquid-gas combination called refrigerant in order to function. The refrigerant line connects the condenser with the indoor air handler of an air conditioner. Since this line is outside, it needs to be protected from the elements. The issue is that DIY refrigerant line installations frequently lack the proper insulation.
This causes problems with energy efficiency and puts unnecessary stress on the air conditioner. What, then, is the best way to insulate a line that carries refrigerant? All you have to do is go to this link and do what it says. Are you still in need of assistance? Get in touch with an HVAC repair service near you.
Using an excessive amount of refrigerator:
You’ve installed your air conditioner. The next step is to add some refrigerant. Oh crap, you went and did it again; this time you messed up the system. Don’t put yourself in that position! You must strictly adhere to the instructions when adding refrigerant. If you overfill your air conditioner with refrigerant, it will not work properly and will cost you a lot of money to fix. You should probably just call in a certified HVAC expert as a precaution. Experts have extensive experience with these procedures and can guarantee that the system is properly configured.