Before contacting a professional or changing any parts, it is an excellent idea to try resetting your Daikin Singapore air conditioner if it fails to operate properly. Your air conditioning can be reset, which will save you both time and money.
There are a few distinct methods to reset an air conditioner, notably a Hard Reset that requires unplugging the device for at least one minute and turning off the breaker. By utilizing the remote control or reset button, you can also restart your air conditioner.
There are reset techniques that might target particular problems with the air conditioner, such as a glowing green indicator, thermostat, or timer that isn’t functioning properly. But it’s crucial to comprehend why a reset is suggested in each circumstance first. So let’s look more closely at why resetting your Daikin air conditioner could be required before talking about the reset procedures.
Why might you want to reset your air conditioner?
There are several causes, but a tripped breaker is the primary one. Like the majority of electrical appliances, an air conditioner has a separate circuit breaker. To be precise, two. One working from the inside, the other from the outside. A circuit breaker, in general, is a safety switch that safeguards your device by instantly shutting it down when an overload is discovered. This avoids explosions and fires.
After a power outage, the abrupt increase in electrical voltage can result in a circuit overload in your equipment. A circuit breaker then engages at this point. However, sometimes an AC unit may not operate as effectively as it did before a breaker is tripped. A simple reset may be all that’s required if you have it set to a low setting but all you feel is warm air.
Ways to rest air conditioner:
1. From the isolator switch resetting:
An isolator switch on your air conditioner could be located between your appliances and the main power source. The purpose of it is that the electrical system should be isolated from your air conditioner to improve safety when doing maintenance and repairs. Your AC might restart successfully if you turn it on and off.
In contrast to an isolator, a circuit breaker disconnects the power supply when there is an overcurrent. An isolator is frequently placed close to the outdoor component rather than the switch box. Although it is not necessary, it improves safety and shields your air conditioner from electrical discharges.
Locate the isolator switch frequently on the outdoor unit to reset the system. Near the condenser, it is normally a lever on a V-shaped socket. Older models, however, can have a different appearance and resemble the standard switches you have at home more.
The switch for other appliances, including split systems, is typically located close to the indoor air handler’s front cover. If you still can’t find it, you can look it up in the owner’s manual to have a clearer sense of where it is. You can switch off the isolator once you’ve found it and wait for 30 minutes. The AC can discharge electrostatic charge at that time. You can turn the lever after 30 minutes, and your air conditioner should restart without any issues.
2. “Reset button” reset technique:
Don’t panic if your air conditioner isn’t cooling, isn’t turning on, or is making strange noises. There is a straightforward method you may use to reset it. Simply locate and press the tiny red reset button on the front of the indoor equipment. This reset button is intended to assist the AC unit in repairing errors and returning to normal operation. Additionally, the outside unit has a reset button that you may click to restart the AC if there is a power outage.
After that, your air conditioner will go into self-diagnostic mode for approximately thirty minutes, enabling you to find any underlying faults that might be the source of the issues. It’s important to remember not to hit the reset button too firmly, though. It might become broken or stuck if you do this, which would make it useless. Thus, when pushing the reset button, be gentle.
3. Circuit breaker reset:
Try the circuit breaker if the isolation or reset buttons don’t work to restart your air conditioner. Usually, the circuit breaker is located in the basement, side of the home, or laundry room. It might be in a closet or even the crawlspace in some houses. One large switch and several smaller switches for various circuits in your house can be found in the breaker box.
Most breakers will be labeled with the specific connection information. Look for the “AC” one and turn it off. The breaker may trip due to an electrical surge or blackout. If there is no label, locate the switch and flip it to the on position. Your air conditioner can now be restarted to see if it is operational.
If the equipment does not start again, you should refrain from turning the circuit breaker on and off frequently. It is safer to consult a licensed expert if you think there might be an issue with the air conditioner. If you try to fix some problems, you risk electrocution or harm to your home.
4. Reset the thermostat on your AC:
The thermostat should be reset if the previous methods don’t solve the problem. Depending on the temperature readings, the thermostat tells your air conditioner when to start cooling the air. If it’s broken, your equipment could not function at all. Before restarting the system, you can change the batteries in your device.
The electronic parts of the air conditioner occasionally need to be discharged in addition to the batteries being removed. For a replacement if your thermostat is broken, speak with a licensed technician. Depending on the model, there are several steps to reset the thermostat. The majority of today’s devices may be reset simply pressing the reset button for five seconds. The button will typically be on the thermostat’s face or hidden beneath the cover.